Labels for Lighting Assemblies
Coordinate ratings, wiring information and safety messages across luminaire bodies, drivers and power leads. Select each label for the space and conditions at its actual installation point.

Put the Right Information in the Right Place
| Label | Application Point | What to Check |
|---|---|---|
| Luminaire rating labels | The designated information area on the luminaire body | Confirm the approved model, electrical information, market version and available printed area. |
| Driver and ballast labels | An accessible identification area on the power unit | Match ratings and wiring information to the correct unit. Keep diagrams under engineering document control. |
| Safety and installation labels | The relevant installation or service point | Check approved instructions, access and visibility before installation or servicing. |
| Power lead identification | The specified position on a cable or power lead | Confirm jacket material, diameter, label format and readability close to the connection. |
Start with the Surface and the Conditions
Label-position Temperature
Provide the measured temperature at each label location. A driver case, luminaire body and power lead may have different requirements.
Include operating and short peak conditions where relevant; select the exact construction against those needs.
Surface & Installation
Specify the metal, paint finish or plastic receiving the label. Distinguish dry indoor, damp or outdoor use according to the actual application requirements.
Share condensation, sunlight, moisture and cleaning exposure rather than relying on a general waterproof description.
Wiring & Small Print
Supply approved wiring diagrams and ratings for each model. Confirm how much information must fit without reducing readability beyond the drawing requirements.
Check the printed proof at actual size and agree dimensions, quantity, orientation and delivery format.
Where a certification programme applies, any claim must match the exact label construction, application surface and conditions of use. Confirm the applicable record and approved artwork before production.
What to Send for a Useful Quote
- Luminaire, driver and lead label locations
- Actual application surfaces and finishes
- Measured temperatures and installation exposure
- Approved ratings, wiring diagrams and artwork
- Label dimensions, language, quantity and supply format
Coordinate the Labels for Your Lighting Range
Send your luminaire, driver and cable artwork requirements. Our team can discuss the size, material and quantity for a coordinated lighting-label order.

