UL 969 Labels: Check Recognition Before You Order

Check whether a cord tag’s recognition covers your exact application before ordering. Learn how UL 817 requirements and PGIS2 limited-use entries relate to cord type, gauge, placement and service conditions, then verify fit and readability on assembled samples before production.

Article6 min readTianyue Label Solutions

When a drawing says UL label, engineering still needs to identify what the label is supposed to do. It may carry ratings or warnings that must remain legible, reproduce a certification mark, or combine both on one piece. The order needs the applicable end-product requirements, the exact marking construction and any authorization to reproduce a mark. Resolve these points before treating supplier quotations as equivalent.

Identify the category and marking function

UL Solutions describes several categories in its Marking and Labeling Systems program. PGDQ2 is a category for recognized marking and labeling systems, while other categories address specified printing materials or other roles. UL Solutions explains that applicable printing materials can be equivalent when printed with the specified ink under the recognition. Use the documentation for the actual construction and category rather than relying on a short code copied from a prior drawing.

Match the conditions of acceptability

Start with the equipment manufacturer's certification records and identify the required marking. Ask for the substrate, finish, indoor or outdoor exposure, temperature at the marking location and any additional conditions. Then retrieve the proposed construction and its conditions of acceptability in Product iQ. A file number helps find the record, while the relevant entry and conditions determine whether that construction fits the project.

Confirm who can reproduce the mark

The UL Authorized Label Supplier Program addresses authorized production and distribution of UL marks. A combination label can require both the applicable marking performance and an authorized supplier for the mark. Use the current Marks and Label Hub instructions and approved files. A component recognition symbol visible in a generic photograph is not a source of approved artwork for another product.

Verify the site and supply route

Check the site and supply route. Manufacturers with more than one production country may use multiple sites or converting routes. Verify the actual site and authorization relevant to the order, particularly if printed labels and finished assemblies pass through different facilities. File coverage, label supplier authorization, and the finished product's certification record should be checked separately.

Control substitutions after approval

Keep the approval reproducible. Store the product marking requirements, documented construction, permitted materials and processes, proof and first article together. Assign change control for adhesive, face film, laminate, ink, printing route, substrate or plant. A visually identical sample after a supplier change can have different documented coverage or physical performance. Reopen the affected evidence before release.

Worked example: a label change preserves the artwork

Illustrative example.

Suppose a label converter proposes a substitute ink or face film after the artwork has been approved. A physical proof can look identical, yet the substitution can affect the recognized construction, print durability or conditions for applying the mark. Ask for the precise change and compare it with the applicable recognition and accepted materials. Identify whether the product owner or certification body needs to review the change before approval.

Separate performance and authorization in the purchasing record. First confirm the marking system for the installed surface and conditions. Then confirm the party authorized to supply the specific mark and the approved artwork for the product. Verify which manufacturing site will convert the label. Finally, obtain a representative sample and the approval evidence for the revised route. Saving that record makes it possible to answer a later audit with the exact approved construction and source. It also prevents an obsolete approval from traveling with a visually similar part.

Use UL category names consistently

Use Marking and Labeling Systems for PGDQ2 and PGDQ8, Materials for PGGU2 and PGGU8, and Printing Materials for PGJI2 and PGJI8 under the UL program. An equipment manufacturer that adds variable data should verify the applicable Printing Materials recognition and the specified ink, ribbon or toner. Use UL Recognized for the applicable component construction, UL Certification Mark for the mark in approved artwork, and Authorized Label Supplier for the supplier role under the mark program. Verify the actual category, Conditions of Acceptability and mark ordering route in UL records. Industry catalogs show how these terms are used on specifications. Project scope comes from the governing record.

LINTEC industrial labelstock and overlaminate terminology Sunny Sealing example of variable-data overprinting Brady Japan guide to label categories and ribbon combinations UL Marks and Label Hub label types and ordering

Build the sample and acceptance plan

DecisionSend with the sample requestCheck before release
End-product requirementReleased marking requirements and markets for the equipmentIdentify which content must remain legible and whether a certification mark is required
Construction lookupExact offered label model, category and Product iQ recordCompare actual surface, exposure and temperatures with the documented entry
Artwork authorizationControlled mark artwork and program instructionsConfirm the approved version and authorized production route for the specific order
Manufacturing siteProposed converting site and purchasing routeVerify scope and authorization for the actual facility and label type
Change controlApproved bill of materials and first article recordReview impact and obtain the appropriate approval before making substitutions

1. End-product requirement

Find the equipment marking requirement and name the label function. Separate marking durability from permission to reproduce the certification mark.

2. Construction lookup

Match the exact construction and applicable surfaces. Compare the documented temperature, indoor or outdoor designation and other conditions with the engineering brief.

3. Artwork authorization

Retrieve the approved mark under the applicable program. Keep the authoritative file and its related instructions in controlled project records.

4. Manufacturing site

Document the actual production and distribution route. If there is a different converting site, verify the relevant approval before using it for the order.

5. Change control

Review substitutions to face, adhesive, ink, laminate or substrate as changes to the released application. Keep physical inspection and scope decisions distinct.

Use the record that matches the installed label

Keep a copy or controlled reference to the applicable conditions with the purchase record. In a sourcing review, compare the offered construction code with the relevant entry and note how the actual mounting surface is described. If a coating name or resin grade is missing, collect the information from the equipment drawing or supplier before claiming a match. Record how any gaps were closed and who made the decision. A factory transfer or a label substitution can reopen several conditions at once. A short traceable note tied to the specific construction is more useful than a broad statement that a supplier carries a file.

Frequently asked questions

Is UL Recognized label stock enough for a finished rating label?

Check the recognition category and applicable printing and conversion conditions for the finished marking.

Can we print the mark from a screenshot?

Use the current approved artwork and instructions for the product and authorized supplier route.

Request a technical review

Send TYLabel the information in the sample request table, along with the intended application, destination and expected order quantities. Ask for an engineering sample or a construction review against your current drawing. For a related application, see our transformer rating labels.

Read next in the TYLabel resource library. UL, CSA and ETL Labels: An Export Artwork Checklist.

Technical references

WeChat — Amy

WeChat

Scan in WeChat, or open and save the image to scan from your phone.

Open QR Image