What Makes a Label for a Certification Program Different?

Two labels can look identical and have different approval records. When your product requires a recognized or accepted label, check the exact construction against the surface, temperature and exposure in the applicable record. If the artwork includes a certification mark, check who is authorized to supply it and which artwork your product may use.

Article6 min readTianyue Label Solutions

“Can I buy the same silver label from a different supplier? The sample looks the same.” Start by asking for the construction reference and the applicable recognition or acceptance record. The visible finish tells you little about the adhesive, ink, or protective film. Those details can affect both performance and whether the proposed label is covered.

What changes when you place the order?

What you checkStandard industrial label orderLabel for a certification program
ConstructionChoose the facestock, adhesive, print and finish against your drawing and performance requirements.Match the proposed construction to the applicable record. Check any restrictions on ink, ribbon or overlaminate.
ApplicationAgree on the actual surface and any tests needed for the job.Check the surface, temperature, indoor or outdoor use, and any other conditions in the exact entry.
ArtworkApprove the wording, layout and any variable fields.If the design carries a certification mark, use the approved artwork and confirm the authorization and ordering route.
SubstitutionsReview fit and performance when the supplier changes materials or printing.Review both performance and coverage before releasing the change. A visually identical sample may have a different construction or approval record.

A standard industrial label can also be durable and made to a controlled specification. The additional question on a certification project is whether the documented construction and use match your product requirements. UL Solutions Marking and Labeling Systems FAQs

Three examples from the types of labels we supply

Transformer rating label. Send the actual enclosure finish and the temperature at the label location. A label quoted for bare metal should be checked again if it will sit on a painted or powder-coated panel. If your factory adds a serial number by thermal transfer, confirm that the applicable entry permits the printing route and specified ribbon. Transformer rating labels

Outdoor grill safety and rating label. Tell us whether the label sits near a hot section or on a cooler cabinet panel. Share the coating and the expected outdoor exposure. Ask which documented construction covers that combination before adding a temperature figure to your purchase specification. CSA safety rating labels

Heater power cord warning label. Send the cord designation, jacket, conductor size and outside diameter. The designation and size help check the applicable record, while the diameter helps check physical fit. Apply a sample to the actual cord and confirm that the text is readable and the wrap or flag closes as intended. Heater power cord warning labels · UL 817 and PGIS2 scope guide

Does a recognized label certify my equipment?

Your equipment has its own certification or approval record. A recognized label construction addresses the marking requirements covered by its entry. A label carrying a UL Certification Mark can also require an authorized supply route. For a combination label that carries both the UL mark and required safety information, review both requirements before sending artwork to print. UL Solutions FAQs · UL Marks and Label Hub

What tests do labels for certification programs usually go through?

Start with the exact label construction and the surface it will stick to. The lab applies representative samples to the specified surface, exposes them to the required conditions, then checks whether the label still adheres and the information remains readable. The test program depends on the standard, the product requirements and the intended use. UL Solutions testing overview

  • Construction review. Identify the facestock, adhesive, ink or ribbon, print process and any protective overlaminate. Use samples made with the proposed production construction.
  • Environmental conditioning. Depending on the application, expose applied samples to heat, humidity or water. Low temperatures, chemical exposure and UV weathering can also apply. Use the method and conditions specified for the project.
  • Appearance and adhesion. After conditioning, look for lifting at the edges, curling, wrinkling or shrinkage. Check adhesion using the method in the applicable standard or test plan.
  • Legibility and resistance to defacement. Check that the required text and symbols remain readable. Where a rub or wipe test applies, use the specified liquid, contact method and duration. A customer-specific alcohol wipe can be useful for incoming inspection. Confirm separately whether it is part of the required certification test.
  • Cord tag checks. For flags and wraps, use the actual or specified cord construction. Check legibility and closure after installation, and confirm any additional tests required by the applicable cord or end-product standard.
CheckTypical methodStandard or record to consult
Heat, moisture and waterCondition applied samples at the specified temperature, humidity or water exposure. Inspect after conditioning.UL 969 or CSA C22.2 No. 0.15, as applicable
Sunlight or weatheringUse the specified UV or weathering exposure when required. Recheck print and adhesion afterward.Applicable label standard and documented exposure conditions
Chemical resistanceExpose samples to the specified agent using the prescribed method. Check print and label condition afterward.Applicable label or end-product standard. Record any separate buyer wipe test.
Adhesion and appearanceInspect edge lift, curl and shrinkage. Measure adhesion where required by the test plan.Applicable standard and the exact evaluated surface and construction
Print legibility and defacementInspect text and symbols after conditioning and any prescribed rub or defacement test.Applicable label or end-product marking requirements
Flag or wrap-around cord tagsCheck the applied marking on the specified cord. Follow the tests required for the documented tag and end use.CAN/UL 969A where applicable. For PGIS2, check the specific end-product standard cited in the recognition entry, such as UL 817 where listed.
ETL project markingsConfirm marking requirements with the applicable product record and approved artwork. Check what tests the underlying product standard calls for.Applicable product standard and Intertek authorization

Before asking for a test report, confirm the standard and edition, mounting surface, finished construction, intended exposure and acceptance criteria. An outdoor test result should be reported with its conditions. An accelerated exposure result alone does not establish a calendar-year outdoor life. UL 969 scope · UL 969A scope · CSA adhesive-label standard notice · Intertek Authorization to Mark

What to send TYLabel for a quote

Send the approved artwork or marking requirement, a drawing or sample of the mounting surface, and the expected temperature and exposure. Tell us whether the artwork carries a mark and whether anyone will add data after delivery. We can review the proposed construction and identify which documents and samples your team needs to approve before placing the order. How to check UL 969 label recognition

WeChat — Amy

WeChat

Scan in WeChat, or open and save the image to scan from your phone.

Open QR Image